Saturday 4 July 2015

Uttaranchal Well – An Innovative Technology for Water Supply Schemes

In the hills of Uttaranchal, small streams (gadheras) normally flowing at a steep gradient are used as source of water for gravity water supply schemes. Boulder Filled Gallery (BFG) is the conventional water source tapping arrangement. During monsoons considerable flow and high velocity of flowing water causes heavy thrust on cross wall endangering the safety of structure. In case of structure surviving the flow, the problem of silting in the ponding area on upstream side causes choking of perforated pipes and intake chamber. Further, the high velocity of water results in erosion of down stream pitching and foundation, making the foundation exposed and  ultimately leading to the settlement of foundation and failure of structure.

To address this persistent problem in BFG maintenance, an innovative technology namely the Uttaranchal Well has been applied in Swajal based on Uttaranchal Jal Sansthan experiences. Uttaranchal well is a device to tap the sub-surface flow of gadhera, which has a direct connection with the surface flow of water. The sub-surface flow of a perennial stream under hydraulic pressure is tapped in this system.

Uttaranchal Well is a hollow cylindrical M.S pipe open at the bottom and closed at the top with radial perforated pipes welded just above the bottom of the pipe. It is connected with a welded outlet socket at the middle of the vertical cylinder. This 1 to 1.5m long hollow cylindrical pipe is placed vertically with its radial pipe about 3 to 3.5 m below the bed of the stream (gadhera) with open end at the bottom and closed end at the top. After placing the Uttaranchal Well, the dugged space is filled up with graded filter media around the Uttaranchal Well up to the natural bed level of the stream (gadhera).

The sub surface flow of the stream rises in the cylindrical pipe through its open end and perforated radial pipes due to hydraulic pressure of the submerged surface and maintains a static level in the cylindrical pipe. The outlet pipe, which is placed at the middle of the well, is connected to the gravity main of the water supply scheme. The gravity main starts drawing water from the well. The static level of the well is maintained due to hydraulic pressure. Thus a continuous flow is maintained. The scheme is designed considering the minimum discharge of the stream during the summer.

Uttaranchal Well has been installed successfully in three villages Sara, Shera Sonali and Kamtoli of district Pithoragarh. The Uttaranchal well system in above villages is working satisfactorily for past one year.

The advantages of Uttaranchal Well over BFG are

1- Construction: The construction of Uttaranchal Well is easier and speedy. The capital cost is about 14% of the cost of BFG.
2-  Filtration: The sub-surface flow is tapped after natural process of filtration and with upward flow, thereby removing the turbidity and suspended particles to a great extent.
3- Easy Maintenance: The absence of Slow Sand Filter (SSF) reduces the quantum of maintenance works to a great level. The provision of gravel, grit and sand envelope around Uttaranchal Well and its strainer minimizes the chance of choking the structure.
4- Low risk of damage: As the whole structure is below the bed level of gadhera, the chance of damage due to big boulders or high velocity surface water flow hitherto prominent in the case of BFGs, is negligible.

The successful installation and subsequent maintenance of Uttaranchal Well in these three villages has demonstrated that this innovative technology can be implemented as source work for gadhera schemes. However, a detailed assessment of the efficacy of these wells as well as those executed by other departments needs to be done before replicating it on a wider scale.


J.R. Sharma
Ex. Engineering Consultant,
DPMU, Pithoragarh

No comments:

Post a Comment